山東路沿石的用途使用講解
路沿石雖然是一種天然的石材，但是，它后期畢竟是經過加工才投入運用的.
Although curbstone is a natural stone, it was processed and put into use later on
使用路沿石石材制作的薄板來進行園林地面或是屋面瓦的鋪設，可以給人一種古樸自然的感覺，然后如果在室內也裝飾一些墻面裝飾的話，就會給人一種返璞歸真的效果，現在很多仿古建筑中都用到了路沿石,但是路沿石板石材表面不能打磨，也不可以承受重的東西，所以大家要小心維護。
The use of thin sheets made of curbstone for laying garden floors or roof tiles can give a sense of simplicity and naturalness. If some wall decorations are also used indoors, it will give people a return to nature effect. Nowadays, many antique buildings use curbstone, but the surface of the curbstone cannot be polished or can't bear heavy objects, so everyone should be careful to maintain it.
1.人員組織。為了保證石牌樓的百年大計，應該組織富有石牌樓施工經驗、工作認真負責的施工隊伍。其中包括：經驗豐富的選料人員、耐心細致的放線人員，技術過硬的雕刻人員，膽大穩妥的安裝人員。各部人員都要按照設計要求，有條不紊的做好自己所負責的各項工作。
1. Personnel organization. In order to ensure the long-term plan of the stone archway, a construction team with rich experience in stone archway construction and serious and responsible work should be organized. This includes experienced material selection personnel, patient and meticulous setting out personnel, skilled carving personnel, and bold and reliable installation personnel. All personnel in each department should follow the design requirements and do their respective tasks in an orderly manner.
2.選擇石料。選擇石料應該一“量”二“看”三“聽”四“杵”。一“量”：選擇石料要對所選的石料進行丈量，用彎尺放線二“看”：仔細查看石料的斷開面，要選擇同一個山場，色澤比較一致的石料，否則會出現較大色差三“聽”：用手錘敲砸石料，如發聲梆子清脆，說明石料的整體性能好。四“杵”：用釬子杵一杵石料的凸出部位，進一步查看石料的堅實密度。
2. Select the stone material. The selection of stone materials should include "measuring", "looking", "listening", and "pestle". 1. "Measurement": When selecting stones, measure the selected stones and use a curved ruler to set the line. 2. Four "pestles": Use a drill rod to pestle the protruding part of the stone material, and further check the solid density of the stone material.
3.放線制樣。成品構件要分類編號，分類存放。
3. Setting out and preparing samples. Finished components should be classified, numbered, and stored in categories.
4.制作構件。
4. Make components.
5.構件包裝。將構件平放在托板上用塑料薄膜包好，然后用粗鐵絲打摽拴牢，打摽數量根據構件的長度而定，同時在打摽鐵絲與構件接觸之處墊上一塊廢輪胎，以防傷到構件。有雕飾的大型構件用塑料薄膜包好使用木條箱包裝，包裝時要固定穩妥，放平擠實。
5. Component packaging. Place the component flat on the support plate and wrap it with plastic film, then use thick iron wire to tie it tightly. The number of ties depends on the length of the component. At the same time, place a waste tire at the contact point between the tie wire and the component to prevent damage to the component. Large components with carved decorations should be wrapped in plastic film and packaged in wooden crates. The packaging should be securely fixed and placed flat and compacted.
下一篇：植草磚比較適合用在哪些地方？
相關產品
相關新聞
資訊推薦Information
聯系我們Information
- 濟南龍?jiān)澜ú挠邢薰?
- 電話：13905418708
- 地址：濟南章丘區棗園街道吉祥村工業園
